Publications – Hodge Materials Research Group

Book Chapters

Deformation behavior of nanoporous materials in “Micro and Nano Mechanical Testing of Materials and Devices”
Edited by Professor F.Yang of University of Kentucky and Professor J.C.M. Li of University of Rochester, Springer 2008

Mechanical properties of nanoporous gold in “Nanoporous Gold: From an Ancient Technology to a High-Tech Material”
Edited by Arne Wittstock, Jurgen Biener, Jonah Erlebacher and Marcus Baumer, RSC Nanoscience & Nanotechnology No. 22 Royal Society of Chemistry 2012

2024 Publications

Combinatorial CuNiAl As-Sputtered and Annealed XRD Data [Data set]
A. Alwen, M. Ziegner, N.J. Peter, R. Schwaiger, A.M. Hodge, Materials Data Facility
DOI: 10.18126/32WY-3A03

The high temperature creep and fracture behavior of Inconel 718 produced by additive manufacturing
T.J. Oros, K. Son, A.M. Hodge, M.E. Kassner, Scripta Materialia, 251, 116208, (2024)
DOI: 10.1016/j.scriptamat.2024.116208

Combinatorial and high-throughput investigation of growth nanotwin formation
A. Alwen, A. Liang, P.S. Branicio, A.M. Hodge, Acta Materialia, 270, 119839, (2024)
DOI: 10.1016/j.actamat.2024.119839

Microstructure and thermal stability of crystalline/amorphous Fe/FeW nanomultilayers
K. Russell, C. Killeen, N.J. Peter, R. Schwaiger, J.R. Trelewicz, A.M. Hodge, Scripta Materialia, 242, 115962, (2024)
DOI: 10.1016/j.scriptamat.2023.115962

Magnetron Sputtering as a Microstructural Screening Tool for Laser Additive Manufacturing: Study on Ni Superalloys
D.C. Goodelman, M.E. Kassner, A.M. Hodge, Advanced Engineering Materials, 2301585, (2024)
DOI: 10.1002/adem.202301585

2023 Publications

CoFeNiTi_x and CrFeNiTi_x high entropy alloy thin films microstructure formation
A. Liang, D.C. Goodleman, A.M. Hodge, D. Farkas, P.S. Branicio, Acta Materialia, 257, 119163, (2023)
DOI: 10.1016/j.actamat.2023.119163

Progression of the dealloying front in bilayer Cu-Al and Cu-Zn nanoporous foams
K.D. Hemmendinger, A.M. Hodge, Journal of Materials Research, 1-9, (2023)
DOI: 10.1557/s43578-023-01069-8

The mechanical performance of optically tuned ceramic nanomultilayers
D. White, C.D. Appleget, E. Rossi, M. Sebastiani, A.M. Hodge, Materials & Design, 231, 112014, (2023)
DOI: 10.1016/j.matdes.2023.112014

Distribution of nanodomains in heterogeneous Ni-superalloys: effect on microstructure and mechanical deformation
D.C. Goodelman, A.M. Hodge, Acta Materialia, 252, 118940, (2023)
DOI: 10.1016/j.actamat.2023.118940

Correlation between plasma characteristics, morphology, and microstructure of sputtered CuAl alloy films with varied target geometry
A. Alwen, A.M. Hodge, Materials Research Express, 10, 016402, (2023)
DOI: 10.1088/2053-1591/acb31a

2022 Publications

Unraveling Thermodynamic and Kinetic Contributions to the Stability of Doped Nanocrystalline Alloys using Nanometallic Multilayers
W. Cunningham, S. Mascarenhas, J.S. Riaño, W. Wang, S. Hwang, K. Hattar, A.M. Hodge, J.R. Trelewicz, Advanced Materials, 34, 27, (2022)
DOI: 10.1002/adma.202200354

An Overview of Nano Multilayers as Model Systems for Developing Nanoscale Microstructures
C. D. Appleget, J.S. Riaño, A.M. Hodge, Materials, 15, 382, (2022)
DOI: 10.3390/ma15010382

Atomistic Modeling of Physical Vapor Deposition on Complex Topology Substrates
M.G. Eberhardt, A.M. Hodge, P.S. Branicio, Computational Materials Science, 203, 111111, (2022)
DOI: 10.1016/j.commatsci.2021.111111

2021 Publications

Coatings for Core-shell Composite Micro-lattice structures: Varying Sputtering Parameters
A.R. Garcia-Taormina, C.M. Kurpiers, R. Schwaiger, A.M. Hodge, Advanced Engineering Materials, (2021)
DOI:10.1002/adem.202101264

Phase Transition Zones in Compositionally Complex Alloy Films Influenced by Varying Al and Ti Content
D.C. Goodelman, D.E. White, A.M. Hodge, Surface and Coatings Technology, 424, 127651, (2021)
DOI: 10.1016/j.surfcoat.2021.127651

A Review of Coated Nano- and Micro-Lattice Materials
A.R. Garcia-Taormina, A. Alwen, R. Schwaiger, A.M. Hodge, Journal of Materials Research 1-21, (2021)
DOI:10.1557/s43578-021-00178-6

Grain Boundary Evolution of Highly Nanotwinned Alloys: Effect of Initial Twinned Microstructure
J.A. Bahena, T. Juarez, L. Velasco, A.M. Hodge, Scripta Materialia, 190, 27-31 (2021)
DOI:10.1016/j.scriptamat.2020.08.024

2020 Publications

Characterization of Grain Boundary Engineered Aluminum-Magnesium Alloy
K.D. Hemmendinger, J.A. Bahena, A.M. Hodge, Advanced Engineering Materials, 2000813, (2020)
DOI: 10.1002/adem.202000813

Development of a heterogeneous nanostructure through abnormal recrystallization of a nanotwinned Ni superalloy
J.A. Bahena, N.M. Heckman, C.M. Barr, K. Hatar, B.L. Boyce, A.M. Hodge, Acta Materialia, 195, 132-140, (2020)
DOI: 10.1016/j.actamat.2020.05.057

Nanomaterials by Design: A Review of Nanoscale Metallic Multilayers
A. Sáenz-Trevizo, A.M. Hodge, Nanotechnology, 31, 1-30, (2020)
DOI: 10.1088/1361-6528/ab803f

Exploring Microstructural Variations in Highly Transparent AlN/SiO₂ Nano Multilayers
C.D. Appleget, A.M. Hodge, Optical Materials Express, 10, 850-859 (2020)
DOI:10.1364/OME.389156

2019 Publications

Scaling-up of Nano-architected Micro-Structures: A Mechanical Assessment
A.R. Garcia-Taormina, T. Juarez, J.S. Oakdale, J. Biener, A.M. Hodge, Advanced Engineering Materials, (2019)
DOI: 10.1002/adem.201900687

Optical and Mechanical Characterization of Sputtered AlN/Ag Multilayer Films
C.D. Appleget, A.M. Hodge, Advanced Engineering Materials, (2019)
DOI: 10.1002/adem.201801268,

Exploring the Thermal Stability of a Bimodal Nanoscale Multilayered System
J.S. Riaño, A.M. Hodge, Scripta Materialia, (2019)
DOI: 10.1016/j.scriptamat.2019.02.043

2018 Publications

Thermally Activated Microstructural Evolution of Sputtered Nanostructured Mo-Au
J.A. Bahena, J.S. Riaño, M.R. Chellali, T. Boll, A.M. Hodge, Materialia, (2018)
DOI: 10.1016/j.mtla.2018.09.019

Phase transformations in the W-Cr system at the nanoscale
J.S. Riaño, A.M. Hodge, Materialia, (2018) DOI: 10.1016/j.mtla.2018.07.021

Sliding wear behavior of fully nanotwinned Cu alloys.
J. Yan, A. Lindo, R. Schwaiger, A. M. Hodge, Friction, (2018) DOI: 10.1007/s40544-018-0220-z

Mechanical Properties of an Fe-Based SAM2x5-630 Metallic Glass Matrix Composite with Tungsten Particle Additions.
I.C. Cheng, J.P. Kelly, E. Novitskaya, V. Eliasson, A. M. Hodge, O.A. Graeve, Advanced Engineering Materials, 1800023, DOI: 10.1002/adem.201800023, (2018).

Evaluating sputter deposited metal coatings on 3D printed polymer micro-truss structures.
T. Juarez, A. Schroer, R. Schwaiger, A. M. Hodge, Materials and Design, 140, 442-450, (2018).

Microstructural deformation in fatigued nanotwinned copper alloys.
N. M. Heckman, M.F. Berwind, C. Eberl, A. M. Hodge, Acta Materialia, 144, 138-144, (2018).

Exploring the microstructural evolution of Hf-Ti: From nanometallic multilayers to nanostructures.
J.S. Riaño, A. M. Hodge, Scripta Materialia, 142, 55-60, (2018).

2017 Publications

Nanoporous Metals with Structural Hierarchy: A Review.
T. Juarez, J. Biener, J. Weissmüller, A. M. Hodge, Advanced Engineering Materials, 1700389, DOI: 10.1002/adem.201700389, (2017).

Tensile behavior of fully nanotwinned alloys with varying stacking fault energies.
N. M. Heckman, L. Velasco, A. M. Hodge, MRS Communications, 1-6, (2017).

Study of β precipitation and layer structure formation in Al 5083: The role of dispersoids and grain boundaries.
J. Yan, A. M. Hodge, Journal of Alloys and Compounds, 703, 242-250, (2017).

Growth twins in high stacking fault energy metals: Microstructure, texture and twinning.
L. Velasco, A. M. Hodge, Materials Science and Engineering: A, 687, 93-98, (2017).

2016 Publications

Improve sensitization and corrosion resistance of an Al-Mg alloy by optimization of grain boundaries.
J. Yan, N. M. Heckman, L. Velasco, A. M. Hodge, Scientific Reports, 6, 26870, (2016).

Influence of twin thickness and grain size on the tensile behavior of fully nanotwinned CuAl alloys
N.M. Heckman, L. Velasco, A.M. Hodge, Advanced Engineering Materials, 18, Issue 6, 918-922 (2016).

The mobility of growth twins synthesized by sputtering: tailoring the twin thickness
L. Velasco, A.M. Hodge, Acta Materialia, 109, Pages 142–150, (2016).

Sputtered Hf-Ti nanostructures: A segregation and high-temperature stability study
M.N. Polyakov, T. Chookajorn, M. Mecklenburg, C.A. Schuh, A.M. Hodge, Acta Materialia,108, 8-16 (2016).

Fracture, fatigue, and creep of nanotwinned metals
X.Y. Li, M. Dao, C. Eberl, A.M. Hodge, H.J. Gao, MRS Bulletin, 41, Issue 4, 298-304 (2016).

Designing In Situ and Ex Situ bulk metallic glass matrix composites via spark plasma sintering in the super cooled liquid state
J.P. Kelly, S.M. Fuller, K. Seo, E. Novitskaya, J.C. Farmer, V.E. Eliasson, A.M. Hodge, O.A. Graeve, Acta Materialia, 93, 26-38 (2016).

Shock Wave Response of Iron-based In-Situ Metallic Glass Matrix Composites
G.R. Khanolkar, M.B. Rauls, J.P. Kelly, O.A. Graeve, A.M. Hodge, V. Eliasson, Scientific Reports, 6, Article number: 22568 (2016).

Synthesis of nanoporous gold tubes
T. Juarez, A.M. Hodge, Advanced Engineering Materials, 18, Issue 1, 65-69 (2016).
DOI: 10.1002/adem.201500249

2015 Publications

Orientation dependent fracture behavior of nanotwinned copper
A. Kobler , A. M. Hodge , H. Hahn, C. Kübel, Applied Physics Letters, 106, 261902 (2015).

The influence of grain size and grain orientation on sensitisation in AA5083
R. Zhang, R.K. Gupta, C.H.J. Davies, A.M. Hodge, M. Tort, K. Xia and N. Birbilis, Corrosion, Vol. 72, Issue 2, 160-168 (2015).

Mechanical characterization of an Fe based amorphous alloy with tungsten particle additions
I–C. Cheng, J.P. Kelly, V.E. Eliasson, O.A. Graeve, A.M. Hodge, submitted, Journal of Materials Research (2015).

Effect of loading rate on dynamic fracture morphology of a Zr-based bulk metallic glass
G. R. Khanolkar, S. Haghighat, A.M. Hodge, K. M. Flores and V. Elliasson, Material Transactions, Vol. 56, Issue 6, 840-843 (2015).

2014 Publications

Note: A method for minimizing oxide formation during elevated temperature nanoindentation
I.C. Cheng, E. Garcia-Sanchez, A.M. Hodge, Review of Scientific Instruments, 85, 096106 (2014).

The role of grain boundary plane orientation in β phase precipitation in Al 5456
Y.F. Zhao, M.N. Polyakov, M. Mecklenburg, M.E. Kassner, A.M. Hodge, Scripta Materialia, 89, pp. 49–52 (2014).

Load sharing phenomena in nanoscale Cu/Nb multilayers
M. N. Polyakov, J. Lohmiller,P. A. Gruber, A. M. Hodge, Advanced Engineering Materials 15, No. 9999 (2014).

Influence of stacking fault energy on twin spacing of Cu and Cu-Al alloys
L. Velasco, M.N. Polyakov, A.M. Hodge, Scripta Materialia, 83, p33-36 (2014).

On the mechanical performance and deformation of nanotwinned Ag
T.A. Furnish, A.M. Hodge, APL Materials 2, 046112 (2014).

Incipient plasticity of single Crystal Tantalum as a function of temperature and orientation
O. Franke , J. Alcalá, R. Dalmau, ZC Duan, J. Biener, M. Biener, A.M. Hodge, Phil. Mag (2014).

The effect of nanotwins on the corrosion behavior of copper
Y.F. Zhao, I.C. Cheng, M.E. Kassner, A.M. Hodge, Acta Materialia, 67, p181–188 (2014).

High temperature morphology and stability of nanoporous Ag foams
I.C. Cheng, A.M. Hodge, Journal of Porous Materials, 21, p467–474 (2014).

2013 Publications

Microstructural variations in Cu/Nb and Al/Nb nano metallic multilayers
M.N. Polyakov, E. Courtois-Manara, D. Wang, K. Chakravadhanula, C. Kübel, A.M. Hodge, Applied Physics Letters, 102, 241911 (2013).

Temperature-dependent strain localization and texture evolution of highly nanotwinned Cu
T.A. Furnish, J. Lohmiller, P.A. Gruber, T.W. Barbee, Applied Physics Letters, 103, 011904 (2013).

Strength scale behavior of nanoporous Ag, Pd, Cu foams
I.C. Cheng, A.M. Hodge, Scripta Materialia, 69, pp. 295-298 (2013).

2012 Publications

Thermal stability of highly nanotwinned copper: the role of grain boundaries and texture
Y.F. Zhao, T.A. Furnish, M.E. Kassner, A.M. Hodge, Journal of Materials Research, Vol. 27, pp3049-3057 (2012).

Nanostructured alpha and beta tantalum formation-Relationship between plasma parameters and microstructure
A. A. Navid, A. M. Hodge Materials Science and Engineering A. 536, p 49-56 (2012)

Elastic and Viscoelastic behavior of Agar
V.T. Nayar, J.D. Weiland, C.D. Nelson, A.M. Hodge, Journal of the Mechanical Behavior of Biomedical Materials, 7, p 60-68 (2012)

Planar defect nucleation and annihilation mechanisms in nanocontact plasticity of metal surfaces
J. Alcala, R. Dalmau, O Franke, M Biener, J Biener, AM Hodge, Physical Review Letters, 109, 075502 (2012)

Size and scale effects on the viscoelastic characterization of soft biological materials
V.T. Nayar, J.D. Weiland, A.M. Hodge, Tissue Engineering C, December 2012, 18(12): 968-975.

Twin stability in highly nanotwinned Cu under compression, torsion, and tension
A.M. Hodge, T.A. Furnish, C.J. Shute et al., Scripta Materialia 66(11), pp. 872-877 (2012).

Morphology, Oxidation and Mechanical Behavior of Nanoporous Cu Foams
I.C. Cheng, A.M. Hodge, Advanced Engineering Materials 14(4), pp. 219-226 (2012).

2011 Publications

High Pressure Torsion of Copper Samples Containing Columns of Highly Aligned Nanotwins
C.J. Shute, B.D. Myers, Y. Liao; S. Li; A.M. Hodge; T.W. Barbee, Y.T. Zhu, J.R. Weertman Scripta Materialia, 65, Issue 10, Pages 899-902.

Shear band formation and ductility in nanotwinned Cu
A.M. Hodge, T.A. Furnish, A.A. Navid, T.W. Barbee Scripta Materialia, 65 (2011), pp. 1006-1009.

Fatigue and damage of copper samples containing aligned nanotwins
Shute, CJ; Myers, B; Xie, S, Hodge, A.M. et al. Acta Mater. 59 (2011) 4569–4577.

Nanoindentation of Porcine Sclera
V.T. Nayar, J.D. Weiland, A.M. Hodge Materials Science and Engineering C, Vol. 31, p796-800 (2011).

Dynamic nanoindentation of articular cartilage
O. Franke, M. Göken, M. Meyers, K. Durst, A.M. Hodge Materials Science and Engineering C, Vol. 31, p789-795 (2011).

2010 Publications

Evaluation of thermal and intrinsic stress in copper and tantalum sputtered films
A.A. Navid, E. Chason, A.M. Hodge, Surface and Coatings Technology, 205, pages 2355 – 2361 (2010).

Controllable residual stresses in sputtered nanostructured alpha-Ta
A.A. Navid, A.M. Hodge, Scripta Materialia, 63, Issue 8, Pages 867 – 870 (2010).

Temperature dependence of the plastic flow behavior of tantalum
K. Rajulapati, M. Biener, J. Biener, A.M. Hodge, Philosophical Magazine Letters, Vol. 90, p35–42 (2010).

2009 Publications

High Temperature Nanoindentation: New Developments and Ongoing Challenges
Zhi Chao Duan, A. M. Hodge,JOM, 61, p32-36 (2009).

Compaction behavior and mechanical properties of uniaxially pressed Bi-W composites
Martin P.L., A.M. Hodge, G.H. Campbell, Metallurgical and Materials Transactions A, 40A, p2124-2136 (2009).

Nanoporous Metals by Alloy Corrosion: Formation and Mechanical Properties
J. Weissmüller, R.C. Newman, H-J Jin, A.M. Hodge, J.W. Kysar. MRS Bulletin, 34, 577-586 (2009)

The Assessment of the Ambient-Temperature Mechanical Properties of Ultrafine Grained Silver with Nanotwins Using Microshear Tests
M. Kassner et al Scripta Materialia, 61, 9721-9724 (2009).

On the microstructure of nanoporous gold: an x-ray diffraction study
S. Van Petegem, S. Brandstetter, R. Maass, A.M. Hodge, B.S.El-Dasher, J. Biener, B. Schmitt, C. Borca, and H. Van Swygenhoven Nano Letters, 9, p1158-1163 (2009).

Residual stress and microstructure of thick sputtered films
A. Detor, A.M. Hodge et al. Acta Materialia, 57, p2055-2065 (2009).

Ag effects on the Elastic Modulus values of nanoporous Au foams
A M. Hodge, R.T. Doucette, M.M. Biener, J. Biener, O. Cervantes and A.V. Hamza Journal of Materials Research, 24, pp1600-1606(2009).

Microstructural stability during cyclic loading of multilayer copper/copper samples with nanoscale twinning
C.J. Shute, B.D. Myers, S. Xie, T.W. Barbee, A.M. Hodge, and J.R. Weertman. Scripta Materialia, 60, pp1073-1077 (2009).

Detwinning and crack initiation during cyclic loading in multilayercopper/copper samples with nanoscale twining
Shute, CJ; Myers, B; Xie, S, Hodge, A.M. et al. 30th Riso International Symposium on Materials Science – NANOSTRUCTURED METALS: Fundamentals to applications Pages: 171 – 182 (2009).

2008 Publications

Nanoporous plasmonic metamaterials
J. Biener, G. W. Nyce, A. M. Hodge, M. M. Biener, and A. V. Hamza S. A. Maier Advanced Materials, 20, p1211-1217 (2008).

Mechanical deformation of high-purity sputter-deposited nano-twinned copper
A.M. Hodge, Y.M. Wang, T.W. Barbee Jr Scripta Materialia, Volume 59, Pages 163-166 (2008).

Nanoindentation of soft tissue: Current and developing approaches
O. Franke, M. Göken, A.M. Hodge Journal of Metals, volume 60, p49-53 (2008).

Effect of Intermetallic layer formation on the mechanical behavior of laminated Ta/Au composites
A.M. Hodge, M. Kumar, P.W. Martin, G. H. Campbell Materials Science and Engineering A, volume 494, p276-280 (2008).

Strain rate sensitivity studies of cryomilled Al alloy performed by nanoindentation
B. Ahn, R. Mitra, A.M. Hodge, E.J. Lavernia, S.R. Nutt Material Science Forum, Vols. 584-586, pp 221-226 (2008).

2007 Publications

Scaling equations for nanoporous open-cell foams
A.M. Hodge, J. Biener, J.R. Hayes, P.W. Bythrow, A.V. Hamza. Acta Materialia, 55, p1343-1349 (2007).

Compaction behavior of uniaxially cold-pressed Bi-Ta composites
P.W. Martin, A.M. Hodge, G.H. Campbell Scripta Materialia 57, p229-232 (2007).

Mechanical response of freestanding Au nano-pillars under compression
L.A. Zepeda-Ruiz et al. Applied Physics Letters, 91, 101907 (2007).

Dislocation nucleation in bcc Ta (001) studied by nanoindentation
M. Biener, J. Biener, A. M. Hodge, A. V. Hamza Phys. Rev. Letters, 76, 165422 (2007).

2006 Publications

Deforming nanocrystalline Ni at ultrahigh strain rates
Y.M. Wang et. al, Applied Physics Letters, 88, 061917 (2006).

Characterization and mechanical behavior of nanoporous gold
A. M. Hodge, J. R. Hayes, J. A. Caro, J. Biener, A. V. Hamza. Advanced Engineering Materials, 8 p853-857 (2006).

Large scale production of high purity, ultra-fine grain copper
A.M. Hodge, Y.M. Wang, T.W. Barbee Jr. Materials Science and Engineering A, 429 p272 (2006).

Negative strain rate sensitivity in ultra-high strength nanocrystalline Ta
Y.M. Wang, A.M. Hodge, P.W. Bythrow, T.W. Barbee, A.V. Hamza. Applied Physics Letters, 89, 081903 (2006).

Monolithic nanoporous copper by dealloying of Cu/Mn
J.R. Hayes, A.M. Hodge, K. Sieradzki, A.V. Hamza. Journal of Materials Research, 21, p2611-2616 (2006).

Size Effects on the Mechanical Behavior of Nanoporous Au
J. Biener, A. M. Hodge, J.R. Hayes, Cynthia A. Volkert, Luis A. Zepeda-Ruiz, A. V. Hamza., Nano Letters, 6 p2379 (2006).

2005 Publications

Nanoporous Au – a high yield strength material
J. Biener, A. M. Hodge, A. V. Hamza, L.M. Hsiung, and J. H. Satcher Jr. Journal of Applied Physics, 97, 024301 (2005).

Monolithic Nanocrystalline Au Fabricated by the Compaction of Nanoscale Foam
A.M. Hodge, J. Biener, L.M. Hsiung, Y.M. Wang, A.V Hamza, J. Satcher Jr., Journal of Materials Research, 20 p554-557 (2005).

Deformation Twinning in Nanocrystalline Ta
Y.M. Wang, A.M. Hodge, J. Biener, A.V. Hamza, D.B. Liu, T.G. Nieh, Applied Physics Letters, 86, 101915 (2005).

Analysis of Residual Stresses in Thick Uranium Coatings
A.M. Hodge, G.F Gallegos, R.J. Foreman, Journal of Nuclear Materials, 342 p8-13 (2005).

Microscopic failure behavior of nanoporous Gold
J. Biener, A. M. Hodge, A. V. Hamza., Applied Physics Letters, 87, 121908 (2005).

2004 Publications

Evaluating Abrasive Wear of Amorphous Alloys using Nanoscratch Technique
A.M. Hodge, T.G. Nieh, Intermetallics, 12 p741-748 (2004).

Creep of Nearly Lamellar TiAl Alloys Containing W
A.M. Hodge, L.M. Hsiung, T.G. Nieh, Scripta Materialia, 51 p411-415 (2004).

Incipient Plasticity during Nanoindentation at Elevated Temperatures
A.C. Lund, A.M. Hodge, C.A. Schuh, Applied Physics Letters, 85 p1362-1364 (2004).

2001-2003 Publications

Measurements and Modeling of Creep in Open-Cell NiAl Foams
A.M. Hodge, D.C. Dunand, Metallurgical and Materials Transactions A, 34 p2353-2363 (2003).

Pack-Aluminization Kinetics of Nickel Rods and Foams
D.C. Dunand, A.M. Hodge, C. Schuh, Materials Science and Technology, 18 p326-332 (2002).

Synthesis of Nickel-Aluminide Foams by Pack-Aluminization of Nickel Foams
A.M. Hodge, D.C. Dunand, Intermetallics, 9(7) p581-589 (2001).